you are doing it wrong.
for example don't plug network cable into first port you see. make sure it is really the correct one...
CCU port X44 is NOT a ProfiNet interface.
I'm assuming the Advintech is a ProfiNet device, not an EtherCat, yes?
How did you connect the Advintech to the KRC? On what port?
Did you assign online the ip address to the leoni modul?
You need also assign the ip address to the MAC address of the leoni modul.you did that?
Right click on the Profinet interface in the project structure and then select "connect".Right click again and select "Function"-> "Device list and profinet names" from the menu.Find the MAC address of the Leoni modul and assign the ip from the list.
Display MoreHi ,
thanks for response
panic mode you are right i was connecting on ek 1100, now i changed to KONI(pic attached)
SkyeFire yes its a profinet device -now i connected to KONI port
still i have bus error on leoni analysis unit
in krc -error on reading/writing-PNIO-CTRL
oh my.... would you please stop with trial and error? don't just plug things into first port you see....
do not connect ProfiNet devices to KONI...
KRC4 controller ProfiNet interface is not on X44 and not on KONI and not on KSI... it is the KLI
read the manuals and eat your vegetables.
just like scene in a movie 
....reading the docs in profinet kop file would be wise
Hello,
I do not see how to send you private massage. Want to ask you if you have the software of Leoni on disk because I need it...
If you can help me.
carefull....is that legal? why not try to download from Leoni size or ask them for support?
carefull....is that legal? why not try to download from Leoni size or ask them for support?
I will try for support from Leoni. I think the SW is not problem I not ask for Licese. The SW without licese is as demo version...
