Format CF card in DX100

Quote from Robodoc

Okay, now that we know the whole story, try this.

Put your 128meg card in a PC and do these commands;

2. Open a command Window (Windows+r > cmd)

2. diskpart
   A new window will open up with a “diskpart>” prompt
3. list disk
4. select disk n (where n is the number of your CF card)
5. Clean all (this completely re-formats the disk – it will take a while and appear to hang but be patient)
6. create partition primary size=32
7. Select partition 1
   
8. Active
9. format fs=fat
10. Assign
11. Exit

Your 128meg card is now 32meg. You will have to format it in a camera. If it still does not work the CF card you have is uncompatable with the XRC controller.

I did this and it still doesn't work.

Quote from Robodoc

What brand is your CF card?

Cisco, and transcend

Ok, Thanks.