Kuka KSS 13040 Error reading file {configuration}

  • KUKA KRC 4 8.5.8

    Robot: KR10R1100-2

    Options installed: Profisafe ProfiNet



    I’m having an issue getting a few Robots in Auto mode. The only thing that is preventing them from is an KSS13040 Error Reading {configuration file}. I looked through the manual on this and it states Cause: A configuration file is faulty. (IPPNIO.xml, PNIODriver.xml or bas_cm_api.xml). I can locate those files but it doesn’t give me a definitive answer to why it can't read them.



    If you have any insight on this issue please let me know

  • AD
  • well, there is a problem with the file called {"configuration file name"}

    so to get the clue what is wrong, your really need to read the message and see that file name. curly braces are just placeholder where name appears.

    this usually indicate that there is some mismatch, probably because files were not updated when project was deployed. maybe because option is not really installed, or files are not updated when deploying because mentioned option is not integrated into WorkVisual, or it is wrong version etc.

    also check other messages and try including some details. check READ FIRST topic

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account
Sign up for a new account in our community. It's easy!
Register a new account
Sign in
Already have an account? Sign in here.
Sign in Now