sorry for my poor english skill.
I have IRB1400 with S4C Controller.
I want using this Robot and I connect power. I tink battery alarm only making problem but data Error occurs.
which mean this error and how can I fix it.
S4C Controller data Error during boot.
-
blahitebear -
July 30, 2020 at 10:21 AM -
Thread is Unresolved
-
At least you have to reinstall the operating system, you need the floppy disks with the key and the operating system.
You should replace the batteries before.
May be you have a hardware issue on the mainboard or memory.
Advertising from our partners
