As I know, S4C is not supported in Robotstudio.
Are there any older version of Robotstudio available that compatible with S4C (S4C+)?
Or only RoboDK can be a solution?
Robotstudio - S4C
- wld82ngnr_hu
- Thread is Unresolved
-
There was a robotstudio for the older controllers, but it might be difficult to obtain. If your robot model is the same, for example, IRB6600, then you could still use the newer robotstudio for the simulation.
-
Quote
If your robot model is the same
Yes, this is an existing robot model. I did the same what you have suggested
Advertising from our partners
