Hi Kwakisaki & Alexsandru
I have a RS030N robot with a AS Group ASE_010300X4V as in the title when I saved it to .as file. I created some locations and ran them to get a brief idea where the locations were.
I found there was not an exact same AS version in KRoset as I wanted to test the locations I created and added some more locations and programs to monitor the robot behaviour. I chose AS version 10100X3V instead in KRoset, then loaded the locations I created.
I made a motion program to run all the locations I created which they seemed correct to me.
My questions are,
1 If a AS version is not available in KRoset, which happens in my case, is there a way to find a similar AS version in KRoset in comparision to a real robot?
2 Do these locations I loaded to KRoset can let the robot go to the exact same locations as a real robot can even I noticed the zeroing data are different in real robot and KRoset?
3 If I continue working in KRoset to create more locations and programs, are they all acceptable/OK to be loade to the real robot?
(I will only load .pg files and trans as I know their AS group are different.)
Thank you.