Real Time external control of Kuka using RSI

    Hello

    I'm not an Engineer/Programmer but an end-user from India and looking for help from experienced professionals to recommend & install a Kuka, 250kg Payload and an MRMC Bolt. The Data to drive both will come from Autodesk Maya application. I'm aware of KUKA.ready2_animate page. This thread previously dealt with Kuka, MRMC Bolt & Maya and that is the reason posting it here. My mail id "kamal@gen63film.com". I hope this post will be approved by this Forum Moderator. Thankyou.

    Edited once, last by VFXKamal (February 17, 2024 at 12:45 AM).

    Hi Kamal

    Is the Kuka system to run separate from the Bolt?

    If you want to program Kuka in Maya then you will be using the Mimic plugin.

    Mimic has a Slack group which is probably the best place to find out more about that.

    Aside from using Mimic you can also program Kuka directly using an external program such as Mantis which connects to RSI in Kuka. You will need to pm me if you want to know more about that.

    Gerald

Advertising from our partners