Good day
I have a problem with the E2 (rotation table) speed not being constant.it only slow down when its only E2 presented on the command without the other axis.
DEF PipeBuild1()
$vel.cp = 0.025
$vel_extax[2]=100
$ADVANCE=3
$BASE=BASE_DATA[23]
$TOOL=TOOL_DATA[3]
PTP HOme comand*
LIN {E2 -1308.1}C_DIS slow speed
LIN {Y 195.3,E2 -1311.4}C_DIS
LIN {E2 -1314.7}C_DIS slow speed
LIN {Y 195.4,Z -22.,E2 -1318.1}C_DIS
LIN {E2 -1321.4}C_DIS slow speed
LIN {Y 195.5,E2 -1324.7}C_DIS
LIN {E2 -1328.1}C_DIS Slow speed
LIN {Y 195.6,E2 -1331.4}C_DIS
LIN {Y 195.7,Z -22.1,E2 -1334.7}C_DIS
LIN {E2 -1338.1}C_DIS Slow speed
Did i do something wrong or am i missing a certain variable?