Hi everyone, I want to bring the alarm list in Yaskawa to the proface screen. Can you help me? Is there a ready alarm list? If have it I can use. If there is a feature or program that I can pull automatic addresses to, please type. Thank you for your helps.
Yaskawa Alarm List Address for Pro-Face
- CaLSiO
- Thread is Unresolved
-
Which model/version of Pro-face are you using?
-
There is not an alarm list that I know of but it can be added by adding an internal alarm read to a register to be passed by Modbus using this guide:
https://www.yaskawa.com/downloads/search-index/details?showType=details&docnum=AN.MCD.09.124
Do you have a particular controller of Yaskawa you are interfacing too?
-
There is not an alarm list that I know of but it can be added by adding an internal alarm read to a register to be passed by Modbus using this guide:
https://www.yaskawa.com/downloads/search-index/details?showType=details&docnum=AN.MCD.09.124
Do you have a particular controller of Yaskawa you are interfacing too?
I think I sort of misread the initial question and got distracted researching the HMI. This is probably your best bet, there is no list available or means to compile it on the controller and the alarms themselves are stored in various memory addresses, or as Yaskawa generally calls them, parameters. I remember seeing an appendix that listed those which if you (OP) would like I can try to track down when I have some time. -
Hello,
As you know the Proface and Yaskawa controllers are connected by High Speed Ethernet function. for your problem i have sample and i will share with you. you can work on this samples and provide the best way for use Alarms and see those in the HMI.
Advertising from our partners
