Can't load from FTP server

I would like to be able to load jobs from a FTP server with a dx200. I have created a ftp server and set it up on the controller but when I I press "load" i dont even get to the "ftp load" screen.

I have set RS005=0

The connection between the controller and my pc (thorugh ethernet) works fine and Im able to add and delete jobs from a command prompt

The attached wordfile has screen shots of all the settings.

Does something look off or am I missing something?

Quote from Fester1981

It seems to me that your files are in the root folder of your FTP server (content of / @ 192.168.0.20). Did you try to leave the "DIRECTORY" field of the FTP profile empty?

I just tried it and the result is exactly the same . It says “Date accessed with other function”

Quote from Spiddy1

Hi

You have resolved?

Thank

No I never got i working. Instead I bought the MotoDCI32 software which does exactly what I wanted in the first place. The robot can now get JBI files from any PC on the network (as long as the program in running on the PC)

I have attached the manual. That should answer all your questions.

Its a small program that you run on the "host" pc. You specify a Folder from where the robot should get the JBI files-

You then enter robot IP and robot type.

To load the JBI files you use a LOADJ command.

Quote from Spiddy1

It’s only rc controller or are existing for dx and trac controller?

Thank you

I use it with a DX100 and DX200. The controller types you can choose between are XRC/NX/DX, MRX and ERC