Hi all,
New to the forum and also new to Fanuc robots.
My company has some older hardware that I have been tasked with setting up into a small work cell.
I've got an LR Mate 200ib with RJ3ib control, and a Model A IO link rack.
However, I don't have a cable to connect the two.
Unfortunately, we are not on service with Fanuc, so getting some info has been a little difficult.
I do have the manuals for the systems, so I have schematics for the io link interconnect and the connector part numbers.
However, I would much prefer to just purchase a cable.
I've done some searching and found a bunch of Fanuc cables that seem to designate that they are for JD1A - JD1B connection.
However, I cant seem to find out if there is a specific version of this cable I need, or if they are all interchangeable.
One particular p/n I've found is A02B-0124-K820. Does anyone know if this cable will work properly for my application?
They seem to be fairly inexpensive, so I could pick one up and check the pinout to confirm.
However, I figured I would ask here first before ordering.
Thanks in advance! This forum has been a great resource getting started with the robot.
Steve