I’m having issues with two S4C+ 6650 that we have. The errors are:
Error 38665 Motor/Cables for joint 4 have a short circuit
Error 38664 An intermittent short circuit was detected in motor/cable for joint 4
Error 38600 incoming voltage to DC-link too low to DC link A2 in cabinet 1 single phase missing.
if any one can provide any assistance with these error, that would be great.
Every time these errors occur, the tech must stop production, enter the cell and manually clear the error. While we are trying to fix the issues, can anyone tell me how to set up a remote acknowledge error for critical errors such as these so that the operator does not need to enter the cell?