I lost $config.dat of the kuka lwr4+ robot and without archive, what can I do?
Need help (un-resolved): KUKA LWR4+ $config.dat lost
- hangsu1989
- Thread is Unresolved
-
-
did you check D:\intern.zip
that is backup of last archive
-
did you check D:\intern.zip
that is backup of last archive
There is no this folder. The problem is we have nothing in archive folder....
I am not sure if possible to copy this from other people's robot....
-
I think it is becuase of the low battery level. The $config.dat is lost and then all the script are labeled with red cross.....
-
hangsu1989
Changed the title of the thread from “KUKA LWR4+ $config.dat lost” to “Need help (un-resolved): KUKA LWR4+ $config.dat lost”. -
No one kept any Archives copied offline?
You can probably get a "factory" $CONFIG.DAT from KUKA, but it won't have anything that was added since this robot left the factory. Your Base and Tool data would have to be re-created from scratch, at a minimum. Plus any other variables you created in $CONFIG.DAT.
-
There is no this folder. The problem is we have nothing in archive folder....
I am not sure if possible to copy this from other people's robot....
From the image, last failed attempt to do a backup was on u: drive.
I'm guessing this is a network drive.
Did You looked at this place?
-
The U drive, IIRC, was the letter assigned to any USB drive when it was inserted, in that generation of controller.
-
It wasn't E:, on KRC2 ed05?Ooops! It is an LR controller.
Create an account or sign in to comment
You need to be a member in order to leave a comment