Is there a way to have the robot automaticlly display the I/F Panel after it restarts?
I/F Panel
-
Noob1982 -
September 13, 2019 at 4:31 PM -
Thread is Unresolved
-
-
Hi,
Yes it is a S4C Parameter. I hope I am allowed to post it here.
You can set the panel (1 to 10) via Digital Input signals or in Ladder programm.
S4c598 to S4C607 = Panel 1 to Panel 10
S4C597 = no Panel shown
Value 1 ot 1024 =IN#(1) to IN#(1024)