Import Workvisual Project into a different Control Unit

    Hi everybody!

    I have to do a robot program for two identical machines. However, it is not as simple as I expected.

    I already finished my project in the first machine. But when I connect myself to the second machine, I can not just deploy it. On the Workvisual cell there are two control units: a grey one (I suppose it is the one from the second machine) with a green circle (connected?), and a colourful one (The control unit of the first machine, I guess) with a red circle (disconnected?)

    Can somebody explain me how to do the importation?

    Best regards :smiling_face:

    As per the READ FIRST topic: Controller model/generation? KSS version? WorkVisual version?

    As you are talking about "projects," I assume you are talking about KRC4s, with WorkVisual. However, since you don't provide any DETAILS, it's hard to be certain. And without any specific details, it's very hard to give specific advice.

    You can't simply move WV projects from one KRC4 into another, as too much information specific to hardware and serial numbers is part of the project. However, if you look into the "Compare Projects" option in the WorkVisual documentation, this may help you.

Advertising from our partners