Hi guys,
Is possible pulse for a R[timer] second?
I need send a pulse for a different seconds.
Inviato dal mio Redmi Note 7 utilizzando Tapatalk
Hi guys,
Is possible pulse for a R[timer] second?
I need send a pulse for a different seconds.
Inviato dal mio Redmi Note 7 utilizzando Tapatalk
It looks like no. Seems it only allows you to enter a set time. How variable do you need the time to be? Can you make a subcalled program with if/then statements to pulse one of a set of pre-coded durations based on an argument?
Thanks for reply.
I need to pulse a Do for two different timer
Something like this:
DO1=Pulse R[1timer];
Wait DO1=OFF;
End;
Maybe a different way could be:
DO1=OFF;
WAIT=R[1timer]
DO1=on;
I just need to check a condition for a R seconds. This program will be started by a DI=ON.
I try to start a timers when DI=ON, but I always get intp-105 error.
Inviato dal mio Redmi Note 7 utilizzando Tapatalk
hi muniaco,
have you tried this:
For R[1:start value] to R[x:repeats]
DO[X] = ON
wait 0,1sec
ENDFOR
DO[x] = OFF
hi muniaco,
have you tried this:For R[1:start value] to R[x:repeats]
DO[X] = ON
wait 0,1sec
ENDFORDO[x] = OFF
Thanks. I will try and let you know if works!
Inviato dal mio Redmi Note 7 utilizzando Tapatalk