hello I have a problem with the robot otc fd11 and so after replacing the battery I get an error message E0052 encoder battery charger low. the robot does not want to move the batteries are new from what I read it is necessary to reset the encoder. here's the question of how to do it. thank you in advance for your help
Otc daihen fd11 encoder problem
- Plal1609
- Thread is marked as Resolved.
-
-
I had a similar problem when i changed batteries in my fd11, i managed to move the robot in joint mode, and redid my TCP, and that fixed my issue.
-
Hi...I am looking at a 2 headstock work cell and notice some have a door or curtain on both sides of the robot between the robot and the headstock and others don’t. Is there a reason for this? Standard possibly? as I want to do what’s right.