I need to use EtherNetKRL in OfficeLite.
My steps are as follows:
1、Copy "BinaryFixed.xml" to the directory:
"C:\Documents and Settings\Administrator\Desktop\ETHERNETKRL\DOC\Example\Config".
2、Copy "src" and "dat" to Robot
3、The network adapter "VMware Network Adapter VMnet8" of Vmware is in NAT mode,I set the IP fixed as "192.168.1.2"
4、 Set the IP of "BinaryFixed.xml" as 192.168.1.2 , Port as 59153
After deploying this, I run the program in smartHMI,it showed an error saying "Ethernet connection to external system failed".
After searching,I found following things:
1、 I need use KUKA-router to Port forwarding.But no one showed details. I added two nodes in KUKA-router as follows:
Target Host Source Port Target Port
192.168.1.2 59153 59153 (same as VMnet8 and BinaryFixed.xml )
192.168.1.3 59154 59154 (the IP config in smartHMI,the Port is Written at random)
But it is useless.....
2、Someone said make the Vmware port to Vxworks,but where is the Vxworks IP?
Forgive me for my bad English and description. Thanks any suggestion!!! :