Hello! I have the error E0107 on teaching pendant. Does anyone know what the problem is? Thanks.
Hyundai robot error E0107
- Robert Policiuc
- Thread is marked as Resolved.
-
-
looks like a Encoder Error.
Maybe you need to replace a Motor.
I would try a Reboot and try to move one axis after another to find out what Axxis has this Problem. -
This error is for all axis.
Sent from my iPhone using Tapatalk
-
i dont know the Hyundai Robots, so maybe its the Encoder Card.
Can you change it with another Robot ? -
No. I bought the robot like this. It was functional.
Sent from my iPhone using Tapatalk
-
How can you reboot the robot?
-
Switch off/on.
Maybe there is anorher Error on rhe Controller, which helps to detect the reason. -
Check if auto-fuse is off, above amp in the cabinet.
-
For bad bit sequence error, you need to replace the servo motor
-
Try to reboot it. Just switch it off and on.
-
This Error can be caused by defective capacitor and bridge (mostly only capacitor) behind main power switch. worked with theese bad boys for 8 years. if it is Hi4
-
Good morning, I have the same problem with
controller hi4, but I don't find the capacitor (if this is inside the board), can you help me?
Thank you very much
Create an account or sign in to comment
You need to be a member in order to leave a comment