Hello!
Help me please diagnose issue with my IRC5+IRB2400+Flexpendant set
I am setting up this installation and get series of errors displayed in log via flex: 20195-20193-10045-38200-50057(6 times)-50296-10002-20032-10036-10014-10106 (not really relevant). After that, no movement via flexpendant (automatic or manual) is possible. Only available ABB menu items are Settings. Calibration is not available. Is there something wrong with flash card content, or card itself?
Some diagnostic info: I have 3 identical sets of IRC5+2400+Flex, and tried running this set with other fully fucntional CF card, I get log records:
10045-50296-10150-10012-10015-20034-10039-10129. No automatic action is possible even after calibration. Manually I can move manipulator in any direction.
Switching furter manipulator itself bring set to full functional state.
I beleive there`s also trouble with manipulator SMB card. (I have already replaced its battery).
What action can I try for furter diagnistics? Or is this some normal operation and what that means?
My major concern, is it possible to copy such CF cards via conventional cardreader e. g. TS-RDP8K? I`ve used it with dmde tool to save an image of problem card before performing any diagnostic actions. May I broke it while reading?