Pretty new to the YRC1000 I've never had to set up the user input groups. Is there any documentation on this or could someone explain how it works.
User Input Group YRC1000
-
Noob1982 -
January 8, 2019 at 5:36 PM -
Thread is marked as Resolved.
-
-
You can download the manual at Motoman.com, Support, Documentation.
Traditionally, you can read a bit, 4 bits, or 8 bits in a job. The ladder could be 16 bits. The User Group allows you to define how many bits you want to read, up to 32 and what address to start at. You can also use parity. This would change the maximum number of bits you can read. The value to read can be between +- 2.147 billion and change.