Hi guys,
I am doing a project that requires a 6 axis robotic industrial arm.
I have someone offering me this robotic arm:
Model Number: Mitsubishi RV4FLM-1Q1-SE1502
Robot consists of robotic arm, controller, teaching pendant, and cables. The robot has less than 50,000 cycles on it.
CR751-Q Controller
IO Modules
MR-BAT6V1SET
MR-J2CN1
MR-J3BUS3M
MR-BAT6V1SET
HG-KR43
MR-J3ENCBL5M-A2-L
MR-PWS1CBL5M-A2-L
_________________________________________________________
We have a small budget for the project so buying a new robot is not an option at this stage for us.
I know some of the complexity in buying a used robot after reading the sticky on this forum. However, i think some of these major issues like the software being too outdated and no after sales/hardware support from Mitsubishi due to new models coming out. As I know this is still a currently running model.
My questions are:
1. 50,000 cycles a lot for a robotic arm that's less than 2 years old?
2. What is a fair price for such an arm?
Any thing else I would need to check and be aware of please let me know!