Hi Everyone,
When I restart the controller it's giving "Startup motion error -9" then after it's giving following errors:
33417 - Transmissoin error measurement : Error in measurement system 1 at connector board 1 when testing seriel link in normal mode
//Check configuration of measurement_channel,
check seriel link ,
Check/Replace measurement board(s),
Check/ Replace Axis computer board
71058 - No contact with I/O unit - On DSQC 328 "NS" Led is OFF and also at DSQC 509 "EN" Led is OFF
71139 - Access error from IO
I'm using ABB S4C+ M2000 with IRB6400 with track
Anyone let me what is wrong.