How to copy All Of Abobe in filezilla client?

    Hello everyone,
    I have a rj3ib controller and via ethernet and with the client filezilla I wanted to copy the All Of Above, but I do not know how to do it

    I have connected to the controller through the "site manager" menu

    I have entered the IP address of the controller and I can see the controller files but it seems strange to me that I can not see the .PC files that I have in the controller, in the teach pedant if I can see them in the list of programs

    When wanting to pass a .PC file I do not get any error, but when looking if it appears in the controller it does not appear and it does not appear in the teach pedant


    How is the copy of the All Of Above made?
    what is the problem?
    how do I solve it?


    thank you!

    Hallo,

    I think you need to set FSAC Access Level(Sys Variable) to 8 then you can have full read/write access of (.TP, .PC, .VR, .IO, .SV)

    $FSAC_ENABLE = 1 $FSAC_DEF_LV = 0 $FSAC_LIST[1].$IP_ADDRESS = 'IP of PC' $FSAC_LIST[1].$ACCESS_LVL = 8

    Edited once, last by rAviteja_g (October 2, 2018 at 10:23 AM).

    Quote from rAviteja_g


    Hallo,

    I think you need to set FSAC Access Level(Sys Variable) to 8 then you can have full read/write access of (.TP, .PC, .VR, .IO, .SV)

    $FSAC_ENABLE = 1 $FSAC_DEF_LV = 0 $FSAC_LIST[1].$IP_ADDRESS = 'IP of PC' $FSAC_LIST[1].$ACCESS_LVL = 8


    I tried to change the variables that you mentioned, now in the teach pedant I get the following message "host-161 FTP: need remote host name"
    and the filezilla does not connect to the controller

    Quote from rAviteja_g


    Yeah Clear, u also need to give $FSAC_List[].$CLNT_Name
    just give the name what u gave in setup host communication


    I have tried and I still have the same problem, it does not connect. if I put the IP of the controller and its host name if it connects but I still do not see the .PC files and the teach pedant message still appears in all cases

Advertising from our partners