1. Where is the 24V and 0V lines in your panel from the PSU going to on CN2 and CN4 Connectors
- CN2 requires 24V on VIN1 and VIN2 (18 and 19)
- CN2 requires 0V on COM1 and COM2 (36 and 37)
- CN4 requires 0V on COM1 and COM2 (18 and 19)
on CN2: VIN1+VIN2 are on (+) connecting clamp, after output16 from outputs clips and OV (COM1+COM2) are on the right side of the output connecting clamps..
on CN4: 0V (COM1+COM2) is on (- ) connecting clamp, after input16 on the input connecting clamps.