Need help Robotware3.0 installation

    Hello


    I have some problems with my robot:
    After backup bateries run out, robot OS was deleted. I think that They tried to run Robotware 3.2 version, which are incompatible with M97 robot controller with DSQC322, DSQC323, DSQC325 Boards. Now robot does not response to anything, and on all 3 board light Foult LED.


    That I get till now:
    I replaced DSQC322 board and robot rise up and ask me key disk. After that I put Robotware 3.0

    Quote

    3HAC2642-1/02 System Key nonAW 3.0
    Serial no 64-00000

    and robot again freeze up on pretty same point

    Quote

    Don't power off / Wait...........

    . In that state doesn't change throught night


    Do any have any ideas that to do next?


    Robot 6400; backplate DSQC340; robot boards DSQC322, DSQC323, DSQC325; Motor controller 1 pcs of DSQC345C(3HAB8101-3/09A), 2 pcs of DSQC345G(3HAB8101-8/12B);

    The log and the "Don't power off..." message indicates the software updated or tried to update the firmware in the Robot CPU. Does it keep repeating these same steps when you retry loading?

    Hi, guys, I changed another version of Roboguide, and also tryed new Floppy emulator. one of them helps to install robot guide.

Advertising from our partners