SK120 Robot

cj01910 · June 29, 2018 at 4:53 PM

hi we have a an SK120 Robot with MRC Controller that lost the program after a fault. the fault was corrected and we are able to jog the robot on all axis but with no program we are dead in the water we have the

can anybody support that specific Model.

thank to all

95devils · June 29, 2018 at 5:16 PM

You have the what? Programs, Hex files, nothing?

cj01910 · June 29, 2018 at 6:50 PM

we have an older program wrong I/O Wrong variable. it needs reprogramming. the older program was made for a different machine setup

Chang · July 26, 2018 at 2:19 PM

We had a similar issue at the company i am working at, Does anybody where i could find any programming/operation manuals for this controller? would be much appreciated.

Thanks!

Pcarbines · July 27, 2018 at 10:33 PM

Hi , if you cannot find MRC manuals on this site or Motoman, then PM me with your email address.
Please remember the MRC is now old and you need to consider where best to use your resources.

SK120 Robot

Advertising from our partners

How to see your Job Posting (search or recruit) here in Robot-Forum.com