Searching for KRC1 jumper plug X11

not exactly but similar. check download section

this one worked for me today

Does this help:
Open image

Open image

Quote from krishanv911

this one worked for me today

Thanks. That worked for me!

Hi there,

this post is amazyingly interesting for us.

But there are 3 solutions. Would you please tell us wich one is for what?

Hello, I have a problem with e stop in kuka vkr200 krc1 I have such a socket x11 where I need to make bridges

go ahead and make them. you have my permission...

Quote from Grzegorz

Hello, I have a problem with e stop in kuka vkr200 krc1 I have such a socket x11 where I need to make bridges

If it's a VKRC1, instead of a KRC1, it should not have an X11, it should have a similar connector labelled XS2.

If it's a KRC1, with an X11, how does your X11 wiring compare to the examples earlier in this thread?

This is my socket x11

please read READ FIRST.

if that connector is indeed an X11, it is not wired properly, bunch of circuits are missing. but don't just insert jumpers, make sure to know exact version of the controller before connecting thing.

hmmm no... that is not a robot controller, that is a teach pendant.

in the wold of gaming consoles gamers refer to input device as "controller". it is what they hold in hand.

this is a different world.

your robot controller is cabinet where the connectors are. KRC1 looks something like this:

and it has name plate that identifies version.

I am from Poland and the controller is said to be on the teach pendant... 

pasted-from-clipboard.png

this is my robot controller

and plate

Hi everybody, is such nice to be here again!

A friend of mine bought an old VKRC1 fom Brazilian VW. He told me that there are a problem with safety, the X11 wiring is not the same that the KRC1, like @Skyfire sad above.

Does someone have the right X11/XS2 wiring diagram for VKRC1 to share with me?

Thankyou!