hello to all!i dont know if this is the right group for help i need,but ill try,.i have problem with table spinning,every time when i start the program,i have error start point equal to end point,i dont know what cause this problem,yesterday i weld normaly,today problems,maybe orientation parameter is problem?i dont know what to do anymore,thanks for help
Sent from my iPhone using Tapatalk
Problem is what the message says.It seems that you want to make a whole 360 degree circle in one line. This is not possible. You have to split the circle into two parts.
yes i try alredy with more,2,3 circ lines ,but same thing hapens all the time
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Attach the program files (.src and .dat). There must be something wrong with the coordinates.
So the center of the welding is the center of the table? Then I think the table is not integrated properly into the transformation, or You use the wrong base.
Now I see:
If the screenshot of the program is correct, You really use the wrong base. You should use base 17, where the table should be integrated into the transformation.
