Author Topic: How to run the without teach pendent ( in fanuc robot)

    dear sir


    thanks for reply


    actually my cell was already running in auto mode.
    i want my robot to run without teach pendant in automode.


    that mean robot should run its producttion program in auto mode without having Teach pendant connection to controller.....

    We have build a lot of cells without TP's connected.


    All we needed was a dummy connector where the emergency circuit is bridged.
    But before you disconnect the TP, all settings need to be OK (Auto, not in step mode etc. etc.). Then press emergency button on controller. disconnect the TP, put the dummy back. Release emergency button on controller in order to reset the emergency circuit.

Advertising from our partners