I wanted to have a permanent Start Type, ie: Cold Start, but doesn't retain the settings (saved) and for the next shut down it defaults back to Hibernate...
When is on Hibernate it doesn't want to start right, including many times brings a WINDOS BSoD.
Batteries are good and charged. I replaced the Motherboard battery as well.
I tried different memory and no difference.
login in expert/administrator and then change it to cold start.
login as Expert/Admin, open Windows Explorer, navigate to C:/KRC/UTIL/REGUTIL and doubleclick on *.REG file for cold start then reboot
I would like our KRC4 to always do a Cold Start at boot. When I log in as Administrator or Expert attempt to change the default Start Type on the Shut Down screen it gives me the error "Failed to change the start type" (see attached screenshot).
I tried to find the *.REG file that was indicated, but I did not find any called ColdStart.reg or anything like that. There is one called Hibernate.reg, and upon inspection, I decided to try manually changing the associated registry key value. The Hibernate.reg file sets HKEY_LOCAL_MACHINE\Software\Kuka Roboter GmBH\Cross\Boot\ReStartType key to 2, so tried setting it to 1 and 0 (restarting each time, then turning the machine off and back on), but no luck. Still starts from Hibernate.
What is the correct value for that registry key to change the start mode to Cold Start? Could someone post the contents of the ColdStart.reg file (if that is what it's called)?
Thanks in advance.
you are correct, they are the same, only value changes.[/size]
For KRC2 it was:
dword:00000000 = Cold start
dword:00000001 = Hibernate
dword:00000002 = Warm start
On KRC4 Hibernate is 2 (not sure what 1 is for KRC4 as it does not have WarmStart).
i would check if PMService.User.config is present and valid, if there is something else overwriting registry on powerup or if security settings are changed.
