KR C4 Controller - Cant access Start-Up -> Network Configuration

akselov · November 10, 2017 at 4:05 PM

Hi,

I have a problem accessing Start-Up -> Network Configuration on KR C4 Controller. I have tried all user groups but the Network Configuration tab keeps being gray and not accessible. I need to get into Network Configuration to get the controllers IP so I can connect the KR C4 to a PC by ethernet.

Anyone have had the same problem?

s2007.ravi · November 10, 2017 at 4:08 PM

Cancel the program and login as expert or administrator.

akselov · November 10, 2017 at 4:11 PM

Thank you!

mecch · May 6, 2020 at 2:36 AM

Hi, akselov and s2007.ravi

I have the same problem in KSS 8.3. Would you mind telling me to cancel which program?

Thanks

**panic mode** · May 6, 2020 at 4:47 AM

Don't need to cancel program in this case. Robot program need to be deselected when doing configuration etc.

Btw manual explains how use HMI including selecting and deselecting of robot program.

Anyway, to see network settings just login as expert....

You can also check KLI settings without logging in, just lookup KLI in diagnostics.

KR C4 Controller - Cant access Start-Up -> Network Configuration

Advertising from our partners

How to see your Job Posting (search or recruit) here in Robot-Forum.com

Users Viewing This Thread