Visit our Mainsponsor

Profinet configuration

Casius · 2017-10-03T11:08:44+02:00

Hello I have a KRC 8.2 and a robot Agilus KR6 R900 sixx. (I found cd with vw 2.4 with the robot) I have tried to open the project in Workvisual 4.0, 3.1 and 2.4. but the project doesn't contains the robot. The big problem is that I can't make changes on the profinet to mapp the signals and deploy the project. I got error when I tried to activate the project on expert user 4.0 and 3.1. If I log on upper user (safety or admin) can I damage something? I use the original project . Is possible to export the mapping from vw and copy on the robot controller using a USB? Thank you!

Casius
Oct 3rd 2017
Thread is marked as Resolved.

Casius

Member LVL 15
Reactions Received

1

Trophies

3

Posts

140
Oct 3rd 2017
- #1
Hello
I have a KRC 8.2 and a robot Agilus KR6 R900 sixx. (I found cd with vw 2.4 with the robot)
I have tried to open the project in Workvisual 4.0, 3.1 and 2.4. but the project doesn't contains the robot.
The big problem is that I can't make changes on the profinet to mapp the signals and deploy the project. I got error when I tried to activate the project on expert user 4.0 and 3.1. If I log on upper user (safety or admin) can I damage something? I use the original project .
Is possible to export the mapping from vw and copy on the robot controller using a USB?
Thank you!