The virtual robot has a default IP of 127.0.0.1 and works with ping, FTP, etc
Sent from my SM-G930V using Tapatalk
127.0.0.1 is not a loop back address?... so that mean we are pinging the local host PC... not the vitual robot it self.
In my experience HawkME is partially correct: RoboGuide will open all relevant ports on 0.0.0.0 for the first robot. So they will also be reachable on 127.0.0.1 .
So to answer your question: you can just use the IP of the machine that runs RoboGuide.
Maybe if you can answer the next question that will help me to understand:
What if you have 2 virtual robot in the same workcell. What is the IP adresse of each robot?
Then it will use 127.0.0.2. Inter-virtual-robot communication is done exclusively using the loopback addresses.
