Delete All TP Files

    Hi Guys,


    I have 280 Fanuc R-J2/R-J3 robots that need all their TP and Karel programs wiped prior to plant closure. The manual states you can do a group delete of the backup files stored on FRA: but I can't find a way to group delete from the select screen.


    Has anyone got an idea to achieve this in an efficient way?


    Considered a factory reset but this leaves the robot in an unusable state.


    Cheers

    Cheers Mike,


    I tried an init start of an R-J30 in our training cell a while ago. It seemed to do more than lose mastering. It lost a majority of the menu options too. Nevertheless i'll take another look at this option.


    Thanks.

    Edited once, last by Ubadoob ().

    An INIT start will remove anything that was added or changed after Fanuc delivered the robot. It will be like the software was just loaded.
    Any software/hardware configurations for extended or aux axis or servo gun will be lost.

    Ok, cheers. Most have a group 2 servo gun so I'll abandon this options. Looks like it's going to be slow and painful deleting one program at a time.

Advertising from our partners