Hi guys,
http://imgur.com/a/R7DOv
This is my I/O config screen (SDO screen). Follow FANUC manual, the rack has I/O board is rack 0, Model A is 1 and go on. So what is rack 32 and 48? The CRM2A and CMR2B port is fixed in which rack? which slot?
And if CRM2A is on rack 32, slot 1, how can I receive the signal from SDO125? (I tried setting: SDO[121 - 156] - rack 32 - slot 1 - start point 33. And I test the instruction: SDO[126] = ON, then OFF; But nothing happens in physical port 38).
Thank you guys.
