Hello there everyone,
Thanks for taking the time to read my post with my probably simple question.
I have a Fanuc robot R-2000iA 125L with a RJ3iB controller. It includes In and Outputs modules 32DI and 32DO, also EE Connector RI8 and RO8.
I'm new to Fanuc and have a training planned in November (yes, long time from now). I know my way around a Panasonic robot and I started playing with the Fanuc. It is actually going pretty well. I have it moving nicely around already.
Our goal is to use it to finish plastic products, so it will get a milling cutter to do the job.
That's where my question starts. How do start my electric milling motor? What is the best method.
The motor has its own frequency converter that runs on 230V, it can receive several 10V signals to do something like turn on the motor, turn left or right, low speed or high speed etc.
I was thinking to use the I/O board. Is that smart?
The 10v signal can't come from the I/O board right? It can only do 12v or 24v ?
Any suggestions are most welcome, thanks!
Verzonden vanaf mijn iPhone met Tapatalk