I am working with the Work Visual 4.0 V4.0.18, the divice that im trying to configure is a profinet CUBE 67+BN-PNIO.
I already install the GSMDL given by the provider Murrelectrics GSDML-V2.3. And obviusly i have the profinet thecnology in my controller.
I set the IP, i then i click Apply, Ok. Then i download the program to the controller. No error message shown, But the net is never ok.
Im using another software in order to set the IP and the subnet mask and the LAN works ok.
Anyone that could help me please. I want to set the ip with the work visual
WorkVisual doesnt allow me to set the IP adress for a Cube 67 murrelektronics
-
Cardison -
February 6, 2017 at 8:04 PM -
Thread is Resolved
-
I had this problem with an older KSS/WoV combo. And my problem was with Festo problems.
At that time, I need to use Festo CPX Maintenance Tool.
Advertising from our partners
