Hello,
I have a question about how to control solenoid valve through the IRC5. So, I managed to connect everything, and If I can ask, I want to know if everything is okey. The external 24V power supply("+") is connected to the solenoid valve, "-" is connected to 0 in XS7 cable from the IRC5 and signal cables are connected to solenoid valve. Is that allright ? I'm freshman, just started with robotics, electric and stuff so plz be patient
Sorry for my bad english.
There is the photo:
https://srbnew.dm2303.livefilestore.com/y3pqXv-ihb8DI3…_iOS.jpg?psid=1
The second question(I think it's stupid and easy but i really dont know what is going on) is why on the output from the XS7 I/O there are 44 female pins ? There is the circuit:
http://cdn.vanillaforums.com/robotstudio.va…IRC5Compact.png
And the photo from IRC5:
https://scontent-waw1-1.xx.fbcdn.net/v/t34.0-12/136…095&oe=5787711F
On the circuit I can see only 20 lines with 0 and 24 V x2. Guys pleas halp.
Sry for my bad english.
Regards, Paul.