Hi all,
I'm attempting to calibrate a DKP, but am running into issues. I've set everything up in WoV and calibrated my tool. When I'm going through the screens to set things up it asks for a tool of the external machine and the reference tool on the local controller. None of the documentation covers this (on 8.2) clearly. I've attempted all combinations of setting these tool values to my calibrated tool as well as other values, but the end result of my final DKP root calibration is always 40-250mm off even though I'm doing my 4 point to the inscribed point (X) on the top of the DKP.
I'm sure I'm missing something here - does anyone have advise on what I'm doing wrong and how to remedy? Many thanks in advance