Hello
I have 2 days trying to perform a backup to an old XRC controller, i am trying to use a PC Card I had tried with 6 diferrent PC cards, i got to same error in eveyone when I hit save.
ERROR 3090 Transmission Error with floppy Disk Drive [9]
Somebody got an advice for me ? 
Thanks
Two things
1) Make sure the device is set to CF card
2) XRC robots will only use 32 meg (yes Meg not Gig) and cards made by Sandisk. Some of the newer processors and newer software can use up to a 64 Meg card but good luck finding any of those.
Did you rty your 6 cards in any other XRC robot to see if it's the robot or the cards.
You could try reformatting a larger sized CF card to 64 Meg. You will have to use a 3rd party software, since MS can't do it. This works on another brand robot that has similar limitations on memory cards.
Try setting the device to PC CARD. Don't use FC1 or FC2.
