The FS03 is actually very similar to the FS02 except for the increased 1KG payload.
Which I think has a slightly different mechanical gearing and different software which is only usable on D Controller from previous knowledge.
I've attached the D Controller FS03 Inspection and Maintenance one for your perusal (not a lot in there if I'm honest) plus Motor Replacement for FS02 too......Hope it helps.
p.s I have merged both topics into one.
Hi!
thank you very much, kwakisaki. this forum helped me a lot, i got some more manuals via PM - and was pointed to ask you for more documentation, when needed 
and what do i find: already posted - great!
i hope i can return some of the help i found here, thank you guys!
best regards
carsten
Your welcome
That's what the forum is all about... 
I think the same way, nice to return the assistance back to benefit others where we can.
Glad the information is of some use.
Building up a nice collection of the reliable 'work horse' documentation that's still in active service.
Many thanks Mr C...... 
Located a C Controller Troubleshooting Manual for C4x and C7x Controllers.
Hi
does anybody have the "C-Series Controller operations and programming manual"?
I have seen a hardcopy dated March 10th 1999, but I'm wondering if anyone has a pdf of the same (or more up to date) versions?
thanks in advance
MACran
Hello,
here is the manual. Will be deleted on 10 July, 2018
Attached is some information for the MFP (Multi Functional Panel).
Attached is an Ops and Programming reference manual....
Attached is a nice detailed Electrical Maintenance Manual.......
i have got alot of manuals for the c series controller and will post them now
installation manual
i/o interface
AS language
controller operations and programming
speed control for sealing aplications
