Hi! I'm trying to configure a profibus i/o distributor without any success.
In my controller I have B&R X20IF1061-1 and X20IF1063-1 profibus master and slave. The master is connected to the base of the robot with the multibus cable. On top of the 3rd axe I've connected a BALLUFF BNI0047 Profibus Network interface configurable 16DIN/16DOUT. I've done the configuration with SYCON.net using the .GSD device description file from BALLUFF. I've exported it with WinC5G making the .SPB file. I've copyed this file on the controller in UD:\SYS\CNFG but as soon as I try to configure the master modeule on IO_cnfg program on the controller I receive an error wich is "master network configuration error". I'm not able to figure out what is wrong... could someone take a look at my SYCON.net project since it seems that the problem is in there.
Thanks...