Helloo Guys
I am trying to convert a KL.file to a PC from roboguide, but when i hit the Build Button i get this error
Build Failed: Internal error:
2(0x2)
Unable to load version library
----------------------------------------------------------------------
Can somebody give me some north, is my first time doing this. 
This points to an issue with your Roboguide/OLPC install. Make sure you have the correct versions of files installed, and that all DLLs are still in the right place.
This issue can arise when one (or more) of the DLLs in the C:\path\to\fanuc\roboguide\WinOLPC\Versions\*\bin directories have been corrupted somehow.
It can be diagnosed, but in some cases a re-install of all Roboguide components may be quicker / more efficient.
Hi,
Have you got a solution for this ?
Hi rf103 ,
How would it be possible to diagnose the issue? I would like to avoid reinstalling the whole application if possible. It would also be interesting to know how this could have happen (possible root cause), as I've only had the software installed for a week on this machine.
My problem is that I could build files yesterday, but today I also get the error 0x02... I have checked the files in the WinOLPC folder, and they are there (I've compared them to another machine that has ROBOGUIDE installed).
Any help is appreciated
Update: solved this by creating a new cell and using its robot.ini file for building. I guess for building in Roboguide it would be the same outcome, since I also tried building with the old cell and it failed.
