DX200 Ethernet/IP setting

How you configured the IP address for DX200.

Thanks in Advance

Please help me about Ethernet/Ip config for Dx 200. I can't active my Ethernet/Ip ( cpu board) in setup. what is the matter?

Thank you

see picture attached.

Thank you
Do you have any document or manual about IP connection for example with plc and vision system?

Make sure the Input Instance on the robot is the same as the Output Instance in the PLC.
Likewise for the Output Instance on the robot being the same as the Input Instance in the PLC.

Also, make sure the size (in bytes) matches.

I couldn't enable in adapter. can you help me?

Quote from calhbw

Dear All,

I have solve the communication issues. Do contact me if you have trouble i can share you with.

The problem is from Omron PLC setting.

You can share your EDS file ?

Call Yaskawa/Motoman tech support. A "how to" document exists for connecting DX200 to Omron PLC over Ethernet/IP.

Can you share this documents with us?

Hello guys,

I am facing the same problem to enable the adapter on Ethernet/Ip (CPU board). Has anyone figured out how to fix this?

BR

Quote from loschi

Hello guys,

I am facing the same problem to enable the adapter on Ethernet/Ip (CPU board). Has anyone figured out how to fix this?

BR

What is problem?

Is your Ethernet IP function enable on the controller?