About KR3

happytriger2000 · July 29, 2015 at 9:47 AM

A quick question, where can I buy the connector for the wrist connector IO shown in the picture below stated "1"?

Jonson · July 29, 2015 at 11:10 AM

I think you can ask CONEX or Harting or Binder for help, take a photo and send to them!

happytriger2000 · July 30, 2015 at 1:29 AM

Thanks!

happytriger2000 · August 8, 2015 at 6:09 AM

Took cover apart to investigate further:

There are 2 plugs from the IO round connectors and 3 sockets on the electronic board, which plug goes to which socket?

Jonson · August 10, 2015 at 2:18 AM

I have no idea about this. You can ask KUKA for help!

**SkyeFire** · August 10, 2015 at 1:34 PM

This should be in the wiring diagram that comes with each robot.

happytriger2000 · August 11, 2015 at 6:04 AM

I have these files sent by the seller:

but not 1 one them described anything about wiring for the IO.

**SkyeFire** · August 12, 2015 at 1:35 PM

Each KUKA KRC controller comes from the factory with a full set of electrical diagrams.

Advertising from our partners