overcurrent(servo) help...

  • Hi roboters,

    we are building a system with 3 external axis and the robot(Kr16) is mounted at the flange of the system. when we are trying to move external axis 3 it gives the overcurrent servo and servo drive errors.(KSS 26012 and KSS 26139). And we build exactly the same system it didnt give errors like this.

    What may be the reason for this errors . Waiting for your help.. Thx in advance.

  • Place your Ad here!
  • could be several things... I would first check all connections. for example sometimes insert of for motor connector on the cabinet is not staying in place (when cable is plugged in, it pushes the insert out and the connection is not good). to rule out motor and drives you can swap temporarily E3 with another axis.

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account
Sign up for a new account in our community. It's easy!
Register a new account
Sign in
Already have an account? Sign in here.
Sign in Now

Advertising from our partners