Hey guys.
Need to calibrate the touch screens on these new KRC4s 8.3.8. Don't have time to pour through the Kuka manuals (Don't remember seeing it in there and I have to get this thing running today).
I saw a thread about it already but the only information I saw was "turn key press robot button select calibration" which makes no sense because pressing the "robot button" just decouples the robot from the controller.
I'm pretty sure it's a simple manner just can't find how to do it
Thanks
btw three of eight screens are off by about 1 cm, extremely annoying.
the 8.2.18 bots we got a year ago do not have this issue