Hello ~
DX100 has now set up
Should the RS232 communication
NX100, XRC has already tried it several times
Parameter setting ...
FD003 1
FD053 3
FD074 1
RS000 2
RS005 0
RS029 1
RS130 8
RS131 0
RS132 0
RS133 7
RS134 10
RS135 90
RS136 90
RS137 0
RS138 0
The communication cable is ...
2-3
3-2
5-5
7-8
8-7
Case Shield
XRC, NX100 was no problem in
The DX100 is not ...
I do not know if something changed parameters ...
Wait for help
Hi,
Did you verify if the ethernet option is enabled? I'm not sure but I think they cannot work on the same time.
FD53... why are you activating this function?
This is the Yaskawa vision function. It's possible that this is conflicting with the RS-232 port.
RoboGuru
The protocol known as LG Philips
So set the RS130 ~ 138
Is not it ?? 
And now the CC-LINK option being used
Is there a possibility that this conflict ??
Thanks to the ripple
I think you got the communication parameter sequence wrong (for parity, baudrate and so on):
---------
RS130 8
RS131 0
RS132 0
RS133 7
RS134 10
RS135 90
RS136 90
RS137 0
RS138 0
---------
Should be the same as for MRC, XRC, NX & DX regarding RS-232 settings:
---------
RS30 8
RS31 0
RS32 0
RS33 7
RS34 10
RS35 90
RS36 90
RS37 0
RS38 0
--------
