How can I simulate changes in older controllers such as MRC, XRC?
I have a version of Motosim that supports only NX100 controllers and newer, however I need to test some changes in an older cell and have no way to mount this cell in this version of Motosim.
Thanks!
Simulation of older controlers in Motosim
- Rafael Schroer
- Thread is marked as Resolved.
-
-
MotoSim EG supports all controllers back to ERC.
MotoSim EG-VRC only supports NX, DX, and FS controllers.
Which product are you using? If EG-VRC you would need to purchase EG to do MRC and XRC.
-
Hi 95 devils,
Thanks for the response, I'm using EG VRC at 2.81 version.
What is the difference between EG and EG-VRC?
What is possible to do with different versions?
Sorry for the questions, but at this time i'm a in this area. -
Main difference between EG and EG-VRC:
EG-VRC only supports NX and newer controllers.
EG supports ERC and newer except JRC.EG can only support one robot per controller. EG-VRC will support up to what the real controller will.
EG has an old style pendant
EG-VRC has a virtual pendant of the real pendant. All keystrokes are done with the same keystrokes as the real pendant.
Create an account or sign in to comment
You need to be a member in order to leave a comment